Description
When a stage or install woofer finally gives out, this Eminence 12″ driver gets your enclosure back to full-rated performance without a full cabinet swap. It’s a straightforward retrofit for touring wedges, mains, and fixed-install boxes that need a dependable 12-inch driver rather than a redesign.
- Nominal basket diameter: 12″ (305 mm)
- Nominal impedance: 8 Ω
- Program power: 500 W / continuous: 250 W
- Resonance: 47 Hz
- Usable frequency range: 57 Hz – 4.6 kHz
- Sensitivity: 97.3 dB
- Magnet weight: 38 oz.
- Gap height: 0.312″ (7.9 mm)
- Voice coil diameter: 2″ (51 mm)
With a 97.3 dB sensitivity rating and a usable range stretching from low-mid punch up to 4.6 kHz, this woofer covers a wide swath of program material on its own — useful for two-way boxes or coaxial designs where midrange presence matters as much as low-end push. The 500 W program rating gives you headroom for festival-level SPL demands, while the 8 Ω impedance keeps it compatible with the vast majority of standard PA cabinet wiring.
Note: if you’re pulling this driver for a BETA 8CX, 10CX, or 12CX coaxial cabinet, remember the published figures were measured with the ASD:1001 compression driver mounted but inactive — the tweeter itself is sold separately. Eminence tests all units per EIA-426A/AES methodology in a controlled anechoic-style chamber, so real-world numbers in your specific box may vary slightly with loading and cabinet volume.
Specs and cosmetics are subject to change without notice per manufacturer updates.
Reviews
There are no reviews yet.